Tru Turn Short Shaft Double Jam Nut Kit 1.00 Twin Saito

This is an Adapter Kit Used To Mount Tru Turn Aluminum Spinners Onto The: Newer (Post-99) Saito .50 - 1.00 4-Stroke Engines.

**This kit requires reaming of the front of propeller** **to 1/2" (13mm) diameter for proper thread make up of** **adapter to the Saito short crankshaft. Ream to a depth of 3/8" (9mm).**

FEATURES: Steel Adapter Nuts Screws Onto The Crankshaft Holding the Propeller On, Then A 10-32 Bolt Screws Into The Nut From Front, Holding The Spinner In Place. This Adapter Can And Should Be Used In Place Of The TT-718-A or TT-716-A (Neither Carried) In Any Application Where A Short Shaft Double Jam Nut Kit Is Needed.

INCLUDES: One Short Shaft Double Jam Nut Adapter Kit

REQUIRES: 1/2" End Wrench To Tighten Tru Turn Aluminum Spinner

SPECS: Crankshaft Thread Size: 7 x 1.0mm Spinner Mounting Bolt Thread Size: 10-32

COMMENTS: Use The Saito Aluminum Washer Under Your Tru Turn Adapter Nut and Washer, Then Check Closely For Threads Bottoming Out Or Interfering. Tru Turn Will Modify Backplate For A Small Fee and Postage Paid. The 10-32 Bolt That Is Included With The Spinner Might Require Cutting, Depending On The Prop Used.