Easy-access magnetic hatch Painted Pilot head included Painted one-piece fiberglass cowl Lightweight balsa and plywood construction Genuine UltraCote® trim scheme Two-piece wing for easy transport Requires just three mini servos Low parts count for quick assembly NMPRA-legal for pylon racing competition
Overview
Fans of Goodyear racers from the 1950s will love the sleek lines and exhilarating performance of the LR-1A Pogo 15e. Designed by Jerry Small to give intermediate to experienced modelers a sport plane that can also be flown as a pylon racer, the LR-1A Pogo 15e will accept a variety of power setups. Equipped with E-flite's Power 15 brushless motor, 40A ESC and a 3S Li-Po pack, the Pogo has plenty of performance for sport aerobatics. If or when you want to set it up for pylon racing, the potent combination of E-flite's new Power 25 1250Kv brushless motor, 60A brushless ESC and a high-C 4S Li-Po pack can have you turning laps at speeds in excess of 120 mph or 200kn/h!
Whichever setup you choose, sportster or speedster, you can be sure of one thing - the LR-1A Pogo 15e is one hot little number that will leave you grinning from ear to ear however you fly it.
Specs
Wingspan
49.0 in (1244mm)
Overall Length
36.3 in (922mm)
Wing Area
375 sq in (24.19 sq dm)
Flying Weight
3.13 lb (1.42kg) - 3.25 lb (1.48kg)
Motor Size
Power 15 - Power 25 (1250kV)
Radio
4+ channels
Servos
Mini servos required (3)
Trim Scheme Colors
Ultracote White (U870), Cub Yellow (U884), Midnight Blue (U885)
CG (center of gravity)
2.3 - 2.6 in (60 - 66mm) from leading edge
Wing Loading
19.20 oz/sq ft (61g/ sq dm)
Prop Size
8 x 8E - 10 x 10E
Spinner Size
2.0 in (51mm)
Speed Control
Power 15 - 40A, Power 25 1250kV - 60A
Recommended Battery
Power 15 - EFL 3S3200, Power 25 (1250kV) 4S2500
Approx. Flying Duration
5 - 8 minutes depeding on motor and battery used
Experience Level
Intermediate
Is Assembly Required
Yes
This is radio controlled models it is NOT A TOY.
- It is specially designed for the Hobby enthusiast.
- Inexperienced pilots should seek professional experienced model
pilots for their training.
- It is not suitable for children under 12-years of age (unless under
direct and immediate supervision)
Designed by Jerry Small to give intermediate to experienced modelers a sport plane that can also be flown as a pylon racer
The sleek fiberglass cowl comes out of the box painted and ready to install. Its innovative design makes installation and removal, quick and easy.
The included pilot figure comes pre-painted complete with racing helmet.
Swapping batteries and accessing electronics is easy with the generously proportioned magnetic hatch.
Only 3 Mini Servos required. Aileron, Elevator and rudder control require just one servo each so weight and costs are kept to a minimum.
Customer Reviews:
There are yet no reviews for this product. Please log in to write a review.
Products 
